Excellent Enterprises Plasma CUT-100 Three Phase IGBT Inverter Cutting Machine
Maximum Industrial Plasma Cutting Power for Heavy Fabrication, CNC Production & High-Duty Metal Processing
The Excellent Enterprises Plasma CUT-100 Three Phase IGBT Inverter Cutting Machine is the flagship industrial plasma cutting solution engineered for high-production fabrication facilities, structural steel processors, heavy engineering workshops, shipyards, and CNC metal cutting operations requiring uncompromising cutting speed, edge precision, and continuous-duty reliability.
Built around advanced phase-shift full-bridge IGBT inverter technology, this 100 Amp three phase air plasma cutting machine delivers industrial-grade thermal cutting performance with clean, high-speed cuts across a broad range of electrically conductive metals.
With a clean cutting capacity up to 30mm and severance cutting capability up to 35mm, the CUT-100 is purpose-built for demanding industrial environments where output consistency, minimal rework, and machine uptime directly impact operational productivity.
This is not an entry-level plasma cutter.
This is a production-class industrial cutting platform.
Industrial IGBT Plasma Architecture — Built for Production Workloads
At industrial cutting amperages, power conversion efficiency and arc stability become mission-critical.
The CUT-100 utilizes full-bridge phase-shift IGBT inverter architecture, the same engineering philosophy used in advanced CNC thermal cutting platforms.
Operational benefits include:
✔ Stable plasma arc voltage throughout the cut path
✔ Uniform kerf geometry for dimensional consistency
✔ Reduced dross adhesion and secondary cleanup
✔ Lower inverter thermal stress under sustained load
✔ Improved energy efficiency in high-duty production cycles
✔ Faster cut initiation and smoother arc transfer stability
This architecture enables continuous industrial performance where conventional plasma systems often suffer thermal instability and arc inconsistency.
High-Frequency Pilot Arc Ignition — Industrial Non-Contact Cutting
The integrated HF Pilot Arc ignition system enables non-contact plasma arc initiation, significantly improving consumable longevity and operational flexibility.
This is especially critical when processing:
- Painted steel
- Rusted fabrication material
- Galvanized sections
- Powder-coated structural components
- Expanded metal mesh
- Perforated sheet
- Industrial grating
- Scrap and demolition metal
Unlike contact-start systems, pilot arc ignition maintains arc continuity even across interrupted cut surfaces.
Result:
Faster operation + cleaner starts + reduced torch wear + improved productivity
Technical Performance Specifications
| Industrial Parameter | Specification |
|---|---|
| Product Model | Plasma CUT-100 |
| Machine Technology | Full Bridge IGBT Inverter |
| Cutting Method | Air Plasma Cutting |
| Input Supply | AC 415V ±15% |
| Power Configuration | Three Phase |
| Frequency | 50 / 60 Hz |
| Output Current Range | 20A – 100A |
| Clean Cutting Capacity | Up to 30mm |
| Severance Capacity | Up to 35mm |
| Air Pressure Requirement | 5 Bar / 73 PSI |
| Air Consumption | 220 Ltr/min |
| Duty Cycle | 60% @ 100A |
| Efficiency | 90% |
| Power Factor | 0.93 |
| Protection Class | IP21 |
| Torch Start Type | HF Pilot Arc |
| Compatible Metals | Mild Steel / Stainless Steel / Aluminium / Copper / Brass / Cast Iron |
CNC & Automated Production Compatibility
The CUT-100 is engineered for seamless integration into automated cutting ecosystems.
Suitable for:
CNC Plasma Cutting Tables
Automated Shape Cutting Systems
Plate Processing Lines
Structural Fabrication Automation
Robotic Metal Processing Cells
Industrial Batch Production Operations
Stable arc voltage regulation ensures repeatable cut quality over extended CNC production cycles.
Production Environment Advantages
High-Speed Industrial Metal Cutting
Optimized for faster throughput across fabrication and plate processing workflows.
Minimal Secondary Finishing
Clean kerf quality reduces grinding, deburring, and post-cut cleanup labor.
Industrial Electrical Protection
Integrated protection against:
- Overvoltage
- Overcurrent
- Overtemperature
- Phase loss
- Thermal overload
Sustained Production Reliability
Heavy-duty cooling architecture supports continuous industrial cutting workloads.
High-Value Industrial Applications
The Plasma CUT-100 is ideal for:
Structural Steel Fabrication Plants
Shipbuilding & Dockyard Repair
Pressure Vessel Manufacturing
Bridge Component Fabrication
Railway Coach Manufacturing
Heavy Engineering Workshops
Steel Service Centres
Scrap Processing Facilities
Industrial Demolition Contractors
OEM Metal Manufacturing Units
CNC Thermal Cutting Operations
DEMON SEO FAQ
What is the Plasma CUT-100 used for?
The Plasma CUT-100 is used for industrial plasma cutting of mild steel, stainless steel, aluminium, brass, copper, cast iron, and structural fabrication materials.
What thickness can this 100 Amp plasma cutter cut?
The machine delivers:
- Clean cut up to 30mm
- Severance cut up to 35mm
depending on material type and operating conditions.
Is this plasma cutter CNC compatible?
Yes. The Plasma CUT-100 is fully compatible with CNC plasma cutting systems, automated cutting tables, and industrial production lines.
What is pilot arc in plasma cutting?
Pilot arc enables non-contact plasma ignition, allowing easier cutting of rusted, painted, coated, perforated, and expanded metal surfaces.
Which metals can this machine cut?
Compatible metals include:
- Mild Steel
- Stainless Steel
- Aluminium
- Copper
- Brass
- Cast Iron
Is this suitable for heavy industrial production?
Absolutely. With 100 Amp output, 60% duty cycle, industrial IGBT architecture, and CNC compatibility, this machine is engineered for continuous industrial production.
